|
|||||
|
|
| 管材固体颗粒介质成形工艺及其塑性理论研究 | |
| 引用本文： | 赵长财,任学平,董国疆,王银思,李晓丹,郝海滨.管材固体颗粒介质成形工艺及其塑性理论研究[J].中国机械工程,2007,18(16):2000-2005. |
| 作者姓名： | 赵长财 任学平 董国疆 王银思 李晓丹 郝海滨 |
| 作者单位： | 1. 北京科技大学,北京,100083;燕山大学,秦皇岛,066004 2. 北京科技大学,北京,100083 3. 燕山大学,秦皇岛,066004 4. 秦皇岛职业技术学院,秦皇岛,066100 |
| 摘 要： | 提出一种既能克服刚性模成形和软模成形的缺点又吸取它们各自优点的成形工艺——管材固体颗粒成形工艺（SGMF），为材料的制备和加工提供了新的方法和手段。采用塑性理论对非均匀内压作用下的管材成形过程中的自由变形区塑性变形进行研究，建立了在非均匀内压作用下的管材成形塑性理论，得到了自由变形区的应力、应变及其壁厚的理论计算公式，并通过试验进行了实际验证。 |
| 关 键 词： | 塑性成形 管材 固体颗粒介质 成形工艺 |
| 文章编号： | 1004-132X（2007）16-2000-06 |
| 修稿时间： | 2006-04-17 |
Processes of Solid Granule Medium Forming and Plastic Research |
|
| Zhao Changcai,Ren Xueping,Dong Guojiang,Wang Yinsi,Li Xiaodan,Hao Haibin.Processes of Solid Granule Medium Forming and Plastic Research[J].China Mechanical Engineering,2007,18(16):2000-2005. | |
| Authors: | Zhao Changcai Ren Xueping Dong Guojiang Wang Yinsi Li Xiaodan Hao Haibin |
| Affiliation: | 1. University of Science and Technology Beijing,Beijing, 100083; 2. Yanshan University, Qinhuangdao, Hebei, 066004; 3. Qinhuangdao Institute of Technology, Qinhuangdao, Hebei, 066100 |
| Abstract: | A new forming processes,Solid Granules Medium Forming processes(SGMF) was presented,which can overcome the disadvantages of rigid-tool forming;and has their advantages.It provides a new method for material manufacturing and machining.By plasticity theory,plasticity forming of the free forming area's plasticity forming under nonuniform pressure was researched.The plasticity theory under the nonuniform inter-pressure for tube forming was established.The formulas of free forming area stress and strain and wall thickness were derived and compared with test. |
| Keywords: | plasticity forming tube solid granule medium forming process |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |