| 硅铝炭黑SAC—3~#在丁苯橡胶中补强性能研究 |
| |
| 引用本文： | 朱信明,张芳儒.硅铝炭黑SAC—3~#在丁苯橡胶中补强性能研究[J].青岛科技大学学报,1989(3). |
| |
| 作者姓名： | 朱信明 张芳儒 |
| |
| 作者单位： | 徐州化工学校，徐州化工学校 |
| |
| 摘 要： | 研究了硅铝炭黑 SAC—3~#对丁苯橡胶的补强性,配合剂及 SAC—3~#用量对补强性能的影响,浅释了 SAC—3~#具有补强性的原因。结果表明:硅铝炭黑SAC—3~#补强性比轻质碳酸钙、陶土好;较半补强,高耐磨炭黑差,具有广泛的工业实用价值。
|
| 关 键 词： | 丁苯橡胶 硅铝炭黑 补强性 |
A Study On the Reinforcing Ability of 3—Silicon—Aluminium—Carbon Black in Butadiene—Styrene Rubber |
| |
| Zhu Xinming Zhang Fangru.A Study On the Reinforcing Ability of 3—Silicon—Aluminium—Carbon Black in Butadiene—Styrene Rubber[J].Journal of Qingdao University of Science and Technology:Natutral Science Edition,1989(3). |
| |
| Authors: | Zhu Xinming Zhang Fangru |
| |
| Affiliation: | Xuzhou Institute of Chemical Technology |
| |
| Abstract: | The reinforcing ability of 3—silicon—aluminium—carbon black inbutadiene—styrene rubber band the effects of the amounts of compoundingingredients and 3—silicon—aluminium—carbon black on the reinforcingability were studied.Why 3-silicon-aluminium-carbon black can producaa good effect on reinforcing ability is explained.The results show thatin reinforcement 3-siticon-aluminium-carbon black is better than lightcalcium carbonate and argil,but worse than high abrasion furnace andsemi-reinforcing furnace.And 3-silicon-aluminium-carbon black fiwide application in commercial manufacture. |
| |
| Keywords: | butadiene-styrene rubber silicon-aluminium carbon black reinforcing ability |
| 本文献已被 CNKI 等数据库收录！ |
