| 接触式IC卡控制器的设计与实现 |
| |
| 引用本文： | 罗飞,贺光辉,周祖成.接触式IC卡控制器的设计与实现[J].半导体技术,2005,30(9):64-68. |
| |
| 作者姓名： | 罗飞 贺光辉 周祖成 |
| |
| 作者单位： | 清华大学电子工程系,北京,100084;清华大学电子工程系,北京,100084;清华大学电子工程系,北京,100084 |
| |
| 摘 要： | 描述了一种接触式IC卡接口控制器的设计,给出了接口控制器寄存器的配置、状态转换过程以及工作流程.此设计在IPoD(IP over DVB)项目中通过了FPGA的验证,而且基于Fujitsu的0.35mm的CE61工艺库通过了前后仿真,并用Design Compiler工具进行了综合.
|
| 关 键 词： | IC卡 接口控制器 T=0协议 |
| 文章编号： | 1003-353X(2005)09-0064-05 |
| 收稿时间： | 2005-07-04 |
| 修稿时间： | 2005年7月4日 |
Design and Implement of Controller for IC Cards with Contacts |
| |
| LUO Fei,HE Guang-hui,ZHOU Zu-cheng.Design and Implement of Controller for IC Cards with Contacts[J].Semiconductor Technology,2005,30(9):64-68. |
| |
| Authors: | LUO Fei HE Guang-hui ZHOU Zu-cheng |
| |
| Abstract: | A VHDL design of an interface controller for IC cards with contacts is presented. Theconfiguration of registers used in interface controller, the process of state transfer, and the realworking flow are described. The design is verified on FPGA level in IPo(DIP over DVB)project,it passes through pre-simulation and post-simulation, and it was synthesized with Fujitsu CE61 tech-nology library of 0.35mm. |
| |
| Keywords: | IC card interface controller T=0 protocol |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
