| 大型储罐壁板的装焊工艺 |
| |
| 引用本文： | 陈万定.大型储罐壁板的装焊工艺[J].硫磷设计与粉体工程,2007(2):44-48. |
| |
| 作者姓名： | 陈万定 |
| |
| 作者单位： | 江苏中兴化工设备有限公司,江苏扬州,225115 |
| |
| 摘 要： | 针对50000m^3大型立柱式储罐施工中的焊接应力与变形、厚板的焊透性以及冬季施焊和安全施工等问题，采取了同位倒装施工法等措施，并制订了相应的焊接工艺，使罐壁板的最大平面度偏差控制在23mm，取得了较好的效果，得到了建设方的好评。
|
| 关 键 词： | 储罐＋大型 施工 焊接工艺 效果 |
| 文章编号： | 1009-1904(2007)02-0044-05 |
| 修稿时间： | 2006年12月29 |
Installation Welding Procedure for Large Tank Wall Plate |
| |
| CHEN Wan-ding.Installation Welding Procedure for Large Tank Wall Plate[J].Sulphur Phosphorus & Bulk Materials Handling Related Engineering,2007(2):44-48. |
| |
| Authors: | CHEN Wan-ding |
| |
| Abstract: | For problems existing in the construction of 50 000 m3 large column type storage tank,such as welding stress and deformation,weld penetration of thick plate,and welding in winter as well as construction safety,measures such as same level inverse installation construction method are taken,and corresponding welding procedure is prepared,so that the maximum planeness deviation of the tank wall plate is limited within 23 mm.The satisfactory effects are well accepted by the Owner. |
| |
| Keywords: | storage tank large construction welding procedure effect |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
