Substrate effect on the crystallization of isotactic polypropylene

The evolution of storage modulus measured by a rotational rheometer shows that the isothermal crystallization of isotactic polypropylene (iPP) melts in contact with aluminum plates (PP-Al) are considerably faster than that with stainless-steel plates (PP-SS). The difference is bigger at higher temperatures, and this behavior is opposite to that expected by our numerical simulation considering uniform bulk phase transition and substrate's ability to remove the latent heat. Polarized optical observations and surface energy evaluations via contact angle measurement indicate that surface energy of the substrates, including the effects of submicrometer morphology and roughness, should be the key factor to affect the crystallization of iPP. Transcrystallization zones, in which the nucleation density is controlled by the surface energy of substrates, were observed to grow toward the bulk with the thickness of about 0.2 mm for iPP to affect the global crystallization behavior. The critical value of surface energy of substrate to promote the interfacial crystallization of a polymer melt is derived, in terms of which the aluminum and stainless steel as well as optical glass, promote the surface nucleation with respect to the bulk nucleation of iPP. As a consequence, the conventional differential scanning calorimetry measurement mainly gives the heat fluxes of interfacial crystallization rather than the bulk crystallization due to the large surface-to-volume ratio of the specimen and the aluminum pan used which is a high surface energy substrate. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012