Geometry of chip formation in circular end milling

Machining along continuous circular tool-path trajectories avoids tool stoppage and even feed rate variation. This helps particularly in high-speed milling by reducing the effect of the machine tool mechanical structure and cutting process dynamics. With the increase in popularity of this machining concept, the need for detailed study of a valid chip formation in circular end milling is becoming necessary for accurate kinematic and dynamic modeling of the cutting process. In this paper, chip formation during circular end milling is studied with a major focus on feed per tooth and undeformed chip thickness along with their analytical derivations and numerical solutions. At first, the difference in the feed per tooth formulation for end milling along linear and circular tool-path trajectories is presented. In the next step, valid formulation of the undeformed chip thickness in circular end milling is derived by considering an epitrochoidal tooth trajectory with a wide range of the tool-path radius. The complex transcendental equations encountered in the derivation are dealt with, by a case-based approach to obtain closed-form analytical solutions. The analytical solutions of undeformed chip thickness are validated with results of numerical simulations of tool and tooth trajectories for circular end milling and also compared to the linear end milling. The close resemblance between analytical and numerical calculations of the undeformed chip thickness in circular end milling suggests validity of the proposed analytical formulations. As a case study, the cutting forces in circular end milling are calculated based on the derived chip thickness formulations and an existing mechanistic model. The calculation results reiterate the need of taking into account adjusted feed per tooth and valid chip thickness formulations in circular end milling, especially for small tool-path radii, for more realistic process modeling.