| 滚切刀仿形修磨方法的研究 |
| |
| 引用本文： | 王为,魏春梅. 滚切刀仿形修磨方法的研究[J]. 湖北工业大学学报, 2005, 20(5): 10-11,18 |
| |
| 作者姓名： | 王为 魏春梅 |
| |
| 作者单位： | 湖北工业大学机械工程学院,湖北,武汉,430068 |
| |
| 摘 要： | 提出采用仿形修磨方法代替目前的手工方式刃磨,并对滚切刀曲线刃的仿形模板设计了一种刀补算法.
|
| 关 键 词： | 滚切刀 仿形 修磨 |
| 文章编号： | 1003-4684（2005）10-0010-02 |
| 收稿时间： | 2005-05-10 |
| 修稿时间： | 2005-05-10 |
Research of Rolling Cutter Sh1ape Copy Grind Method |
| |
| WANG Wei,WEI Chun-mei. Research of Rolling Cutter Sh1ape Copy Grind Method[J]. Journal of Hubei University of Technology, 2005, 20(5): 10-11,18 |
| |
| Authors: | WANG Wei WEI Chun-mei |
| |
| Abstract: | When rolling cutter is used in the manufacturing process of automatic production line, it wears off easily and needs being skived very often. To solve this problem, the article proposes to replace the traditional manual grind by shape copy grind method. Further more, the authors work out a new arithmetic of cutter compensation for a shape copy, which is designed for grinding rolling cutter. |
| |
| Keywords: | rolling cutter shape copy grind |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
