| 球磨机大小齿轮的安装 |
| |
| 引用本文： | 谷德明,姜志勇,常亮.球磨机大小齿轮的安装[J].水泥技术,2019(4):33-35,39. |
| |
| 作者姓名： | 谷德明 姜志勇 常亮 |
| |
| 作者单位： | 中材装备集团有限公司 |
| |
| 摘 要： | 介绍了球磨机边缘传动装置的安装找正方法,通过大小齿轮的找正和齿顶隙、齿侧隙的调整,满足大小齿轮啮合面接触面积不小于齿高的40%、齿宽的50%,确保齿轮安装质量和使用寿命。
|
| 关 键 词： | 球磨机 齿轮 齿顶隙 齿侧隙 |
Erection of Ball Mill Gear and Pinion |
| |
| GU Deming,JIANG Zhiyong,CHANG Liang.Erection of Ball Mill Gear and Pinion[J].Cement Technology,2019(4):33-35,39. |
| |
| Authors: | GU Deming JIANG Zhiyong CHANG Liang |
| |
| Affiliation: | (Sinoma Technology & Equipment Group Co.,Ltd.,Tianjin 300400) |
| |
| Abstract: | This article introduces the erection and alignment method of the ball mill edge drive device,by the method of aligning the gears,root and back lash,to meet the requirement of gear meshing contact area not less than 40%of tooth height and 50%of tooth width,ensure the erection quality and service life of the gears. |
| |
| Keywords: | ball mill gear root back lash |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
