| Abstract: | The fluid flow in a twin‐roll strip caster is investigated by physical and numerical simulation on a 1:1‐scale water model. A laser‐optical measurement technique (Laser Doppler Anemometry ‐ LDA) is used to validate the numerical results for the water flow. The numerical simulations are then transferred to the melt flow in the strip caster. The investigations are focused on different SEN concepts (submerged entry nozzle), a single‐nozzle system with two outlet ports and a double‐nozzle system with one outlet port each. The Influence of these concepts on the velocity, turbulence, and temperature distribution inside the liquid pool between the casting rolls and on the solidification and growth of the strip shells are investigated by numerical simulations (Computational Fluid Dynamics ‐ CFD). The non‐isothermal melt flow is calculated considering the solidification enthalpy as well as the behaviour of the solidifying melt. In addition to the numerical simulations of the melt flow inside the pool the temperature distribution in the cast strip is simulated. The SEN concept directly correlates with the temperature distribution Inside the strip. Furthermore, the surface temperature of the strip below the outlet of the roll gap is measured using a line‐scanner and is compared with the CFD simulation. In order to simulate the shape of the free surface in the liquid pool, CFD simulations of the water flow in the physical model are carried out using a Volume of Fluid model (VoF). This two‐phase model is able to reproduce free surface waves. |
