| 低碳相变诱发塑性钢的综合性能 |
| |
| 引用本文： | 张梅,李麟,符仁钰,张诚,韦习成.低碳相变诱发塑性钢的综合性能[J].钢铁,2007,42(3):65-68,72. |
| |
| 作者姓名： | 张梅 李麟 符仁钰 张诚 韦习成 |
| |
| 作者单位： | 1. 上海大学材料学院,上海,200072;上海汇众汽车制造有限公司研究开发中心,上海,200122
2. 上海大学材料学院,上海,200072 |
| |
| 基金项目： | 上海市重点学科建设项目 |
| |
| 摘 要： | 对抗拉强度600 MPa级的低碳相变诱发塑性钢(TRIP钢)进行了拉伸、成形、高速冲击拉伸和激光焊接试验.对焊接前后的综合性能进行了对比,并对其金相组织、显微硬度进行了观察和测试分析.与原始板材相比,激光焊接后,低碳TRIP钢的强度和硬度增加,而伸长率略有下降;焊接热影响区的硬化较明显,但均未发现明显的焊接裂纹及其它缺陷,表明其焊接性能良好.发现低碳TRIP钢成形性能、抗凹陷性能、激光焊接性能良好.
|
| 关 键 词： | 相变诱发塑性钢 动态力学性能 激光焊接 组织 |
| 文章编号： | 0449-749X（2007）03-0065-04 |
| 修稿时间： | 2006-06-01 |
Properties of Low Carbon Transformation Induced Plasticity Steels |
| |
| ZHANG Mei,LI Lin,FU Ren-yu,ZHANG Ji-cheng,WEI Xi-cheng.Properties of Low Carbon Transformation Induced Plasticity Steels[J].Iron & Steel,2007,42(3):65-68,72. |
| |
| Authors: | ZHANG Mei LI Lin FU Ren-yu ZHANG Ji-cheng WEI Xi-cheng |
| |
| Abstract: | The FLD and mechanical properties under high speed impact for low carbon TRIP steel were studied. The mechanical properties, microstructure and micro hardness of laser welded joint were researched. The ultimate tensile strength and hardness of the laser welded samples were larger than the base material while the total elongation was slightly lower. All of the laser welds were free of cracks and other defects. The low carbon TRIP steel also exhibits excellent formability, high strength and fairly good weldability. |
| |
| Keywords: | TRIP steel mechanical properties laser weld microstructure |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
