| 基于ADAMS的抽油机平行位移机构仿真研究 |
| |
| 引用本文： | 刘现文,崔久龙,蔡勇,孙烽尧. 基于ADAMS的抽油机平行位移机构仿真研究[J]. 机床与液压, 2020, 48(13): 161-164. DOI: 10.3969/j.issn.1001-3881.2020.13.036 |
| |
| 作者姓名： | 刘现文 崔久龙 蔡勇 孙烽尧 |
| |
| 作者单位： | 山东科技大学机械电子工程学院,山东青岛266590;山东科技大学机械电子工程学院,山东青岛266590;山东科技大学机械电子工程学院,山东青岛266590;山东科技大学机械电子工程学院,山东青岛266590 |
| |
| 摘 要： | 建立抽油机传动机构中平行位移机构的虚拟样机模型,利用ADAMS软件对采用不同材料蜗轮的平行位移机构进行动力学仿真,得到受力曲线图,验证原设计的合理性并确定最佳蜗轮材料。利用ADAMS软件对平行位移机构传动件进行运动学仿真,仿真结果为平行位移机构的优化设计提供了依据。
|
| 关 键 词： | 运动仿真 运动学特性 啮合力 蜗轮材料 |
Simulation Research on Parallel Displacement Mechanism of Pumping Unit Based on ADAMS |
| |
| LIU Xianwen,CUI Jiulong,CAI Yong,SUN Fengyao. Simulation Research on Parallel Displacement Mechanism of Pumping Unit Based on ADAMS[J]. Machine Tool & Hydraulics, 2020, 48(13): 161-164. DOI: 10.3969/j.issn.1001-3881.2020.13.036 |
| |
| Authors: | LIU Xianwen CUI Jiulong CAI Yong SUN Fengyao |
| |
| Affiliation: | (School of Mechanical and Electronic Engineering,Shandong University of Science and Technology,Qingdao Shandong 266590,China) |
| |
| Abstract: | The virtual prototype model of parallel displacement mechanism in the pumping unit transmission mechanism was established, and the dynamics simulation of parallel displacement mechanism with different materials worm gear was carried out by using ADAMS, the force curve was obtained, the rationality of the original design was verified and the optimal worm gear material was determined. The kinematics simulation of the parallel displacement mechanism was carried out by using ADAMS. The simulation results provide a basis for the optimal design of the parallel displacement mechanism. |
| |
| Keywords: | Motion simulation Kinematic characteristic Mesh force Worm gear material |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《机床与液压》浏览原始摘要信息 |
|
点击此处可从《机床与液压》下载全文 |
|
