首页 | 本学科首页   官方微博 | 高级检索  
     

含内热源多孔介质通道内流动沸腾两相压降的预测
引用本文:张小宁,孙中宁,孟现珂,徐广展. 含内热源多孔介质通道内流动沸腾两相压降的预测[J]. 原子能科学技术, 2014, 48(2): 241-245. DOI: 10.7538/yzk.2014.48.02.0241
作者姓名:张小宁  孙中宁  孟现珂  徐广展
作者单位:哈尔滨工程大学 核安全与仿真技术国防重点学科实验室,黑龙江 哈尔滨150001
基金项目:国家自然科学基金资助项目(11075042)
摘    要:为预测含内热源多孔介质通道内流动沸腾的两相阻力压降,以Ergun方程为基础,定义了多孔介质通道的Chisholm参数Y和全液相折算因子Φl0。通过理论分析和实验数据测量,明确了出口质量含气率xe、质量流速G和小球直径d等对参数Y和Φl0的影响,并提出1个Lockhart-Martinelli(L-M)类型的两相阻力压降关系式。与文献中的其他公式相比,本工作提出的公式对实验结果能做出更好的预测。

关 键 词:两相压降   流动沸腾   多孔介质   内热源

Prediction of Two-phase Pressure Drop During Flow Boiling in Porous Media Channel With Internal Heat Source
ZHANG Xiao-ning,SUN Zhong-ning,MENG Xian-ke,XU Guang-zhan. Prediction of Two-phase Pressure Drop During Flow Boiling in Porous Media Channel With Internal Heat Source[J]. Atomic Energy Science and Technology, 2014, 48(2): 241-245. DOI: 10.7538/yzk.2014.48.02.0241
Authors:ZHANG Xiao-ning  SUN Zhong-ning  MENG Xian-ke  XU Guang-zhan
Affiliation:Fundamental Science on Nuclear Safety and Simulation Technology Laboratory, Harbin Engineering University, Harbin 150001, China
Abstract:Based on Ergun equation, the Chisholm parameter Y and two-phase multiplier Φl0 for porous media channel were defined to predict two-phase pressure drop during flow boiling in porous media channel with internal heat source. Effects of exit quality xe, mass flux G and particle diameter d on parameters Y and Φl0 were identified by theoretical analysis and experimental measurements. A Lockhart-Martinelli (L-M) type correlation for predicting two-phase pressure drop was proposed and it can make more reasonable predictions to experimental results than other correlations available in literature.
Keywords:two-phase pressure drop  flow boiling  porous media  internal heat source
本文献已被 CNKI 等数据库收录!
点击此处可从《原子能科学技术》浏览原始摘要信息
点击此处可从《原子能科学技术》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号