| 低硅条件下碱度对烧结矿强度的影响 |
| |
| 引用本文： | 冯向鹏,张玉柱,李振国,尹海生. 低硅条件下碱度对烧结矿强度的影响[J]. 烧结球团, 2004, 29(2): 9-11 |
| |
| 作者姓名： | 冯向鹏 张玉柱 李振国 尹海生 |
| |
| 作者单位： | 河北理工学院;河北理工学院;河北理工学院;河北理工学院 |
| |
| 摘 要： | 在采用低硅烧结技术进行生产时，由于粘结相总量的减少导致烧结矿强度下降，严重时不能直接人炉冶炼，大大限制了低硅烧结技术的发展。本研究从低硅烧结矿的显微结构及矿物组成出发，研究碱度对烧结矿强度的影响。最后确定出硅含量为4．0的烧结矿的最佳碱度值应为2．4。
|
| 关 键 词： | 低硅烧结矿 碱度 强度 矿物组成 显微结构 |
INFLUENCE OF BASICITY ON THE LOW SILICON SINTER STRENGTH |
| |
| Feng Xiangpeng et al. INFLUENCE OF BASICITY ON THE LOW SILICON SINTER STRENGTH[J]. Sintering and Pelletizing, 2004, 29(2): 9-11 |
| |
| Authors: | Feng Xiangpeng et al |
| |
| Affiliation: | Feng Xiangpeng et al |
| |
| Abstract: | As the silicon content in sinter is lower, leading to the lower binding phase, so the sinter strength was weakened and the production of low silicon sinter was restricted In order to improved the low silicon sinter quality, the microscopic structure and mineralogical constituent of different basicity sinters were studied and the optimal basicity level under the condition of this experiment was found out |
| |
| Keywords: | low silicon sinter basicity sinter strength mineralogical constituent microscopic structure |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
