| Abstract: | In hybrid control of robot manipulators separate controllers are designed for force and position errors control. Controllers are designed either in task or joint space and their outputs combine to provide input torque to the manipulator. Position and force controllers performance in a constrained robotic task is affected by their interaction to a degree dependent on the controller's ability to reject disturbances. Ideally, decoupling of the two control loops is desired to achieve the best performance in position and force directions. In this article, analysis of control loop interactions is performed for contact and noncontact phases, and controller design requirements are developed to achieve maximum decoupling. Design requirements involve output subspace of each controller leading to control discontinuities for contact and noncontact phases. In the noncontact phase, satisfaction of design requirements leads to a fully linearized and decoupled system. When in contact with the constraining surface, design requirements eliminate disturbances in the force loop, but minimize disturbances in the position loop to an extent dependent on force loop performance. Known hybrid control schemes analysis is performed to reveal existence of control loop interactions in these schemes. Confirmation of theoretical analysis is done through simulation of a three revolute planar manipulator. © 1998 John Wiley & Sons, Inc. |
