|
|||||
|
|
| 二次通用旋转组合设计法优化钼粉还原工艺的研究 | |
| 引用本文： | 王德志,邓集斌,杨刘晓,赵宝华.二次通用旋转组合设计法优化钼粉还原工艺的研究[J].粉末冶金技术,2006,24(1):40-44. |
| 作者姓名： | 王德志 邓集斌 杨刘晓 赵宝华 |
| 作者单位： | 1. 中南大学材料科学与工程学院,长沙,410083;陕西省金堆城钼业公司技术中心,西安,710068 2. 中南大学材料科学与工程学院,长沙,410083 3. 陕西省金堆城钼业公司技术中心,西安,710068 |
| 摘 要： | 采用二次通用旋转组合设计试验方法，建立了钼粉粒度、氧含量与还原工艺参数间关系的经验数学模型，绘制了单工艺参数及双工艺参数与钼粉粒度、氧含量间关系的函数图象，得出了制备钼粉的最佳工艺，为钼粉的工业生产实践提供参考。 |
| 关 键 词： | 二次通用旋转组合设计 钼粉 工艺 |
| 收稿时间： | 2004-10-14 |
| 修稿时间： | 2004年10月14 |
Study on optimizing reduction process of molybdenum powder by the quadratic general rotary unitized design |
|
| Wang Dezhi,Deng Jibin,Yang Liuxiao,Zhao Baohua.Study on optimizing reduction process of molybdenum powder by the quadratic general rotary unitized design[J].Powder Metallurgy Technology,2006,24(1):40-44. | |
| Authors: | Wang Dezhi Deng Jibin Yang Liuxiao Zhao Baohua |
| Abstract: | A mathematical model of the relation between molybdenum powder particle size, oxygen content and reduction process parameters has been established by means of quadratic general rotary unitize design. Function graphs of single process parameter and double process parameter contribution to powder particle size and oxygen content are drawn. The optimum reduction process of molybdenum powder is obtained. The results are kept for references to the commercial manufacture practice of molybdenum powder. |
| Keywords: | quadratic general rotary unitized design molybdenum powder process |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |