| 基于边界效应理论确定热轧碳素钢的韧度与强度 |
| |
| 引用本文： | 管俊峰,谢超鹏,HU Xiao zhi,姚贤华,白卫峰. 基于边界效应理论确定热轧碳素钢的韧度与强度[J]. 工程力学, 2019, 36(3): 231-239. DOI: 10.6052/j.issn.1000-4750.2017.07.0988 |
| |
| 作者姓名： | 管俊峰 谢超鹏 HU Xiao zhi 姚贤华 白卫峰 |
| |
| 作者单位： | 1.华北水利水电大学土木与交通学院, 河南, 郑州 450045; |
| |
| 基金项目： | 国家自然科学基金;国家自然科学基金;郑州市科技攻关计划;郑州市科技攻关计划 |
| |
| 摘 要： | 该文研究确定热轧碳素钢的材料韧度与强度特性，提出一种确定热轧碳素钢材料的断裂韧度与屈服强度的模型及方法。建立了等效裂缝长度、名义应力等具体设计参数的计算表达式。通过相同尺寸而不同初始缝高比的单边拉伸Q235B热轧碳素钢板的系列试验，证明所提模型及方法的合理性与适用性。所提模型及方法只需由小尺寸单边裂缝钢板的拉伸试验测得的屈服荷载，即可同时确定出热轧碳素钢平面应力条件下的断裂韧度KC及屈服强度σY。采用该文所提方法确定热轧碳素钢的材料特性，试验试样不需要满足现行国内外规范对试验试样尺寸、型式，加载条件等的严格规定，试样不需要预制疲劳裂纹。
|
| 关 键 词： | 边界效应理论 热轧碳素钢 断裂韧度 屈服强度 平面应力 |
| 收稿时间： | 2017-12-27 |
DETERMINATION OF FRACTURE TOUGHNESS AND YIELD STRENGTH OF HOT ROLLED CARBON STEEL BASED ON BOUNDARY EFFECT THEORY |
| |
| GUAN Jun-feng,XIE Chao-peng,YAO Xian-hua,BAI Wei-feng. DETERMINATION OF FRACTURE TOUGHNESS AND YIELD STRENGTH OF HOT ROLLED CARBON STEEL BASED ON BOUNDARY EFFECT THEORY[J]. Engineering Mechanics, 2019, 36(3): 231-239. DOI: 10.6052/j.issn.1000-4750.2017.07.0988 |
| |
| Authors: | GUAN Jun-feng XIE Chao-peng YAO Xian-hua BAI Wei-feng |
| |
| Affiliation: | 1.School of Civil Engineering and Communication, North China University of Water Resources and Electric Power, Zhengzhou, Henan 450045, China;2.School of Mechanical and Chemical Engineering, University of Western Australia, Perth, WA 6009, Australia |
| |
| Abstract: | The material properties of hot rolled plain carbon steel were studied using boundary effect theory,linked to the properties of toughness and strength. The method for determining the fracture toughness and yield strength of hot rolled plain carbon steel was proposed. The formulas for design parameters ae and σn were obtained. Based on the experimental research on the identical size steel plates of Q235 under tension with different a-ratio=a0/W(ratio of initial cracks a0 and plate size W), the reasonability and availability of this model and appropriate method were experimentally confirmed. The plain stress fracture toughness and yield strength can be measured through the small size single edge notch test(SENT) hot rolled plain carbon steel specimens of a single size with different initial cracks. On top of that, the specimens using this proposed method do not meet the size, pattern and loading requirement from current codes, and do not need the fatigue cracks. |
| |
| Keywords: | boundary effect theory hot rolled plain carbon steel fracture toughness yield strength plane stress |
| 本文献已被 维普 万方数据 等数据库收录！ |
| 点击此处可从《工程力学》浏览原始摘要信息 |
|
点击此处可从《工程力学》下载全文 |
