|
|||||
|
|
Simplified stable crack growth analyses of welded CT specimens—comparison study of GE/EPRI, reference stress and R6 methods |
|
| Authors: | Shinobu Yoshimura Genki Yagawa Chang-Ryul Pyo Koichi Kashima Takashi Shimakawa Shigeru Takamatsu |
| Affiliation: | Research into Artifacts, Center for Engineering, University of Tokyo, 7-3-1 Hongo, Bunkyo, Tokyo 113, Japan Department of Quantum Engineering and Systems Science, University of Tokyo, 7-3-1 Hongo, Bunkyo, Tokyo 113, Japan Central Research Institute of Electric Power Industry, 2-11-1 Iwatokita, Komae, Tokyo 201, Japan Kawasaki Heavy Industries Ltd, 2-4-25 Minamisuna, Koto, Tokyo 136, Japan |
| Abstract: | This paper describes some simplified stable crack growth analyses of two kinds of inhomogeneous CT specimens. The one is machined from a submerged are welded plate of a nuclear pressure vessel A533B Class 1 steel, while the other is machined from an electron-beam welded plate of the A533B Class 1 steel and a high strength HT80 steel. In both specimens, initial cracks are placed to be normal to the fusion line. The ratio of yield stresses of the weld metal and the base metal of the A533B Class 1 steel is about 1·15, while that of the HT80 and the A533B Class 1 steels is about 1·4. The generation phase crack growth analyses using the GE/EPRI and the reference stress methods are performed, calculating an applied load (P) and the J-value, while the application phase analyses of analyses using the R6 method are performed to calculate the maximum value of the applied load (Pmax). Finally, some modification procedures of the three simplified estimation schemes are discussed in order to apply them to inhomogeneous material regimes. |
| Keywords: | |
| 本文献已被 ScienceDirect 等数据库收录！ | |