| 基于UG NX7.5专用后处理器的开发与应用 |
| |
| 引用本文： | 叶金虎,姚忠,戴永红.基于UG NX7.5专用后处理器的开发与应用[J].机械研究与应用,2012(3):168-169,172. |
| |
| 作者姓名： | 叶金虎 姚忠 戴永红 |
| |
| 作者单位： | 罗定职业技术学院,广东罗定,527200 |
| |
| 摘 要： | 以广州数控GSK 983M数控铣床为例,介绍了UG NX7.5软件中的二次开发工具NX PostBuilder7.5进行二次开发的一般方法,并定制了适合于GSK 983M机床专用的后处理器。实际证明,在UG7.5后处理时以该专用后处理器转换的NC代码能直接在GSK 983M上加工。
|
| 关 键 词： | NX PostBuilder7.5 专用后处理器 后处理开发 |
The development and application of special postprocessor based on UG NX 7.5 |
| |
| Ye Jin-hu
,
Yao Zhong
,
Dai Yong-hong.The development and application of special postprocessor based on UG NX 7.5[J].Mechanical Research & Application,2012(3):168-169,172. |
| |
| Authors: | Ye Jin-hu Yao Zhong Dai Yong-hong |
| |
| Affiliation: | ( Luoding polytechnic, LuoDing Guangdong 527200 China) |
| |
| Abstract: | The secondary development process of UG NX PostBuilder7.5 is introduced,and the special postproeessor for GSK 983M numerical control system based on UG NX 7.5 is developed in this paper. The validity of the special postproeessor is proved through actual operation that the NC program, exported from it can be fit for the GSK 983M numerical control system without any modification. |
| |
| Keywords: | NX Post Builder7 5 special postprocessor post development |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
