| 大采高沿空掘巷小煤柱稳定性分析 |
| |
| 引用本文： | 陈昌云,李桂臣.大采高沿空掘巷小煤柱稳定性分析[J].有色冶金设计与研究,2012,33(1):5-8,18. |
| |
| 作者姓名： | 陈昌云 李桂臣 |
| |
| 作者单位： | 1. 中国瑞林工程技术有限公司,江西南昌330031;中国矿业大学矿业工程学院,江苏徐州221008
2. 中国瑞林工程技术有限公司,江西南昌,330031 |
| |
| 基金项目： | 国家自然科学基金青年科学基金资助项目(50904064);煤炭资源与安全开采国家重点实验室自主研究课题资助(SKLCRSM09X03) |
| |
| 摘 要： | 围绕谢桥矿1161（3）工作面特定地质条件,进行了相应大采高沿空掘巷的小煤柱尺寸留设、小煤柱围岩应力场和位移场特征的数值计算。对比不同采深的巷道围岩应力场和位移场特性,给出了不同采深煤柱尺寸留设建议,得出该地质条件下采深500 m应取3～5 m宽度煤柱,采深700 m应取5～7 m宽度小煤柱,超过1 000 m的开采深度煤柱宽度应在7 m以上。
|
| 关 键 词： | 大采高 小煤柱 沿空掘巷 数值计算 |
Research on Stability of Gob-side Driving Entry in Large Mining Height Face |
| |
| Authors: | CHEN Chang-yun LI Gui-chen |
| |
| Affiliation: | 1 (1.China Nerin Engineering Co.,Ltd.,Nanchang,Jiangxi 330002,China; 2.School of Mines,China University of Mining & Technology,Xuzhou,Jiangsu 221008,China) |
| |
| Abstract: | Base on the geology condition of XieQiao mine 1161(3)face,dimension of the small coal pillar of corresponding gobside driving entry in large mining height face,characteristic of stress field and displacement field is calculated.Compared with the characteristic of stress field and displacement field of the drift with different mining depth,it is proposed that-500 m mining depth should take 3~5 m width of the pillar,-700 m mining depth should take 5~7 m width of the small pillar,above-1000 m mining depth should take more than 7m width of coal pillar. |
| |
| Keywords: | large mining height small coal-pillar gob-side entry driving numerical calculation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
