首页 | 本学科首页   官方微博 | 高级检索  
     

干化污泥型煤抗压强度的实验研究
引用本文:董平,张鑫,矫健.干化污泥型煤抗压强度的实验研究[J].洁净煤技术,2010,16(2):26-29.
作者姓名:董平  张鑫  矫健
作者单位:黑龙江科技学院,资源与环境工程学院,黑龙江哈尔滨,150027
摘    要:利用微波干燥脱水污泥制备型煤粘结剂,与粉煤混合压制成型煤。通过正交试验考察成型压力、干化污泥含水率及添加比例对型煤抗压强度的影响。结果表明:微波干化的污泥型煤较粘土型煤的抗压强度大;成型压力、干化污泥含水率及添加比例均为型煤抗压强度的显著因素,各因素优化范围:成型压力为25~30MPa,干化污泥水分为40%左右,干化污泥添加比例为20%~30%。

关 键 词:干化污泥  型煤  粘结剂  抗压强度

Research on compressive strength experiment of drying sludge briquette
DONG Ping,ZHANG Xin,JIAO Jian.Research on compressive strength experiment of drying sludge briquette[J].Clean Coal Technology,2010,16(2):26-29.
Authors:DONG Ping  ZHANG Xin  JIAO Jian
Affiliation:( College of Resource and Environment Engineering, Heilongjiang Institute of Science and Technology, Harbin 150027, China)
Abstract:The briquette binder was prepared by drying sludge using microwave drying, mixed with the pulverized coal to suppress. Inspect the effect of briquetting pressure, moisture and proportion of drying sludge on the compressive strength of briquette by orthogonal test method. The results show that compressive strength of drying sludge briquettes is better than clay briquettes; briquetting pressure, moisture and proportion of drying sludge are major factors in the compressive strength of briquette, the range of content are that briquetting pressure is 25 - 30 MPa, moisture of drying sludge is 40 % , proportion of drying sludge is 20 % - 30 %.
Keywords:drying sludge  briquette  binder  compressive strength
本文献已被 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号