首页 | 本学科首页   官方微博 | 高级检索  
     

柔性连续抽油杆表面防护涂层的摩擦磨损试验研究
引用本文:赵海信,莫易敏,潘运平.柔性连续抽油杆表面防护涂层的摩擦磨损试验研究[J].润滑与密封,2006,32(2):14-16.
作者姓名:赵海信  莫易敏  潘运平
作者单位:武汉理工大学,湖北武汉,430070
基金项目:湖北省武汉市科技攻关项目
摘    要:用销-盘式磨损试验机在模拟油田环境的条件下对柔性连续抽油杆表面防护尼龙涂层材料JKPA和自制的ZZ7024B进行了摩擦磨损对比试验研究。分别考察了滑动速度和载荷对两种材料的摩擦因数以及磨损量的影响。结果表明:自制的柔性连续抽油杆表面防护涂层材料配方ZZ7024B比某公司应用的进口涂层材料JKPA的耐磨性好。

关 键 词:柔性连续抽油杆  表面涂层  摩擦磨损
文章编号:0254-0150(2006)2-014-3
收稿时间:2005-03-03
修稿时间:2005年3月3日

Research on the Friction and Wear of the Nylon Coating Used to Protect the Surface of the Flexible Continuous Sucker Rod
Zhao Haixin,Mo Yimin,Pan Yunping.Research on the Friction and Wear of the Nylon Coating Used to Protect the Surface of the Flexible Continuous Sucker Rod[J].Lubrication Engineering,2006,32(2):14-16.
Authors:Zhao Haixin  Mo Yimin  Pan Yunping
Affiliation:Wuhan University of Technology, Wuhan Hubei 430070, China
Abstract:The friction and wear properties of the nylon coating,used to protect the surface of the flexible continuous sucker rod were studied by using a pin-on-disc wear tester in the simulated oil well environment.The effects of sliding speed and load were considered.The result shows that the friction coefficients of both kinds of materials,JKPA and ZZ7024B used to protect the surface of the flexible continuous sucker rod decrease with sliding speed increasing,but change little with load increasing in the simulated oil well environment.The wear volume of ZZ7024B is smaller than that of JKPA under the same conditions of experimentation.
Keywords:the flexible continuous sucker rod  nylon coating  friction and wear
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号