| 热流道叠式注塑模设计 |
| |
| 引用本文： | 李健心. 热流道叠式注塑模设计[J]. 工程塑料应用, 1999, 27(5): 25-27 |
| |
| 作者姓名： | 李健心 |
| |
| 作者单位： | 山东潍坊高等专科学校 261041 |
| |
| 摘 要： | 分析了叠式注塑模的基本结构，阐述了温控系统、开模机构的设计与选择，并给出了具体的设计实例。
|
| 关 键 词： | 热流道 叠式注射模 模具设计 塑料 注塑成型 |
THE DOUBLE-DECK INJECTION MOULD WITH HOT RUNNER SYSTEM |
| |
| Li Jianxin. THE DOUBLE-DECK INJECTION MOULD WITH HOT RUNNER SYSTEM[J]. Engineering Plastics Application, 1999, 27(5): 25-27 |
| |
| Authors: | Li Jianxin |
| |
| Affiliation: | Shandong Weifang Advanced Academy 261041 |
| |
| Abstract: | The basic structure of double-deck injection mould is analysed. The design and choice of the temperature control system, structure for opening the mould are elaborated. A specific design example is presented. |
| |
| Keywords: | hot runner double-deck injection mould design |
| 本文献已被 CNKI 维普 等数据库收录！ |
