首页 | 本学科首页   官方微博 | 高级检索  
     

预拉伸变形后X60管线钢疲劳裂纹扩展特性
引用本文:陈美宝,王荣. 预拉伸变形后X60管线钢疲劳裂纹扩展特性[J]. 机械工程材料, 2004, 28(7): 18-20
作者姓名:陈美宝  王荣
作者单位:西安石油大学机械工程学院,陕西西安,710065
基金项目:江苏省高新技术产业化资助项目(JH01-071)
摘    要:用单边裂纹试样,研究了X60管线钢经预拉伸变形量为5%、10%和15%后的疲劳裂纹扩展特性。结果表明:随着预拉伸变形量的增加,疲劳裂纹扩展速率提高,尤其是在裂纹扩展的近门槛区。定量分析表明:预拉伸变形降低了疲劳裂纹扩展门槛值,提高了裂纹扩展系数,从而使管线在机械损伤的部位疲劳抗力降低。

关 键 词:疲劳 裂纹扩展 预变形 门槛值 管线钢
文章编号:1000-3738(2004)07-0018-03

Fatigue Crack Propagation of X60 Pipeline Steel after Pre-tension Deformation
CHEN Mei-bao,WANG Rong. Fatigue Crack Propagation of X60 Pipeline Steel after Pre-tension Deformation[J]. Materials For Mechanical Engineering, 2004, 28(7): 18-20
Authors:CHEN Mei-bao  WANG Rong
Abstract:In the present study, experimental investigations were carried out on the fatigue crack propagation characteristics of X60 pipeline steel after different degrees of pre-tension deformation (5%, 10%, 15%). Test results showed that the fatigue crack propagation rate increased with increasing the pre-tension deformation degree, especially at the near threshold section. The results of quantitative analysis showed that the pre-tension deformation reduced the fatigue crack propagation threshold and increased the crack propagation coefficient, and consequently decreased the fatigue resistance of the part with mechanical damage.
Keywords:fatigue  crack propagation  pre-deformation  threshold  pipeline steel
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号