| 基于UG NX6.0的某车型尾门内板修冲模具设计 |
| |
| 引用本文： | 赵鸿鹄.基于UG NX6.0的某车型尾门内板修冲模具设计[J].安徽电子信息职业技术学院学报,2013,12(6):17-20. |
| |
| 作者姓名： | 赵鸿鹄 |
| |
| 作者单位： | 江淮汽车技术中心工艺工程院模具设计部,安徽合肥,230022 |
| |
| 摘 要： | 本文通过实例完成某车型的尾门内板修冲模设计，翔实的介绍了工艺信息的识别、镶块设计要点、压料芯的设计因素、模具结构部分的设计思想。介绍了基于UG6．0版本的三维参数化设计方法，通过运用具有JAC特色的汽车模具标准件，摸索出一套针对汽车开闭件的模具设计方法。满足现代化汽车企业的迅速发展对汽车开闭件模具设计的要求。
|
| 关 键 词： | 修冲模 UG参数化设计 标准件 汽车开闭件 |
A Mold Design of an Auto Rear Door Interior Trim Panel Based on UG NX6.0 |
| |
| ZHAO Hong-hu.A Mold Design of an Auto Rear Door Interior Trim Panel Based on UG NX6.0[J].Journal of Anhui Vocational College of Electronios & Information Technology,2013,12(6):17-20. |
| |
| Authors: | ZHAO Hong-hu |
| |
| Affiliation: | ZHAO Hong-hu (Die Design Department of JAC Technology Center, Hefei 230022, Anhui) |
| |
| Abstract: | Illustrated by examples, this paper presents a mold design of an auto rear door interior trim panel, including the identification of process information, the key points of insert design, the factors of pad design and the design ideas of mold structure. The Three-Dimensional Parametric Design Method based on the UG 6.0 is introduced. By using standard auto parts with JAC characteristics, a mold design method of opening and closing parts for automotive is worked out, which satisfies the needs of the rapid development of modern automotive companies. |
| |
| Keywords: | trim mold UG Parametric Design standard part auto opening and closing part |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
