| 基于ADAMS的某齿轮传动虚拟样机模型的建立 |
| |
| 引用本文： | 杨高宏. 基于ADAMS的某齿轮传动虚拟样机模型的建立[J]. 机械管理开发, 2013, 0(4): 131-132 |
| |
| 作者姓名： | 杨高宏 |
| |
| 作者单位： | 山西机电职业技术学院,山西长治046011 |
| |
| 摘 要： | 首先把某齿轮传动的Pro/E模型导入到ADAMS中,然后在ADAMS中给模型施加动力、载荷和约束等,并在相互啮合齿轮间施加碰撞接触副（Contact）,从而完成虚拟样机模型的建立。最后对虚拟样机模型进行仿真分析,进而证明虚拟样机模型建立的正确性。
|
| 关 键 词： | 齿轮传动 虚拟样机 仿真 |
The Establishment of a Gear Transmission Virtual Prototype Model Based on ADAMS |
| |
| YANG Gao-hong. The Establishment of a Gear Transmission Virtual Prototype Model Based on ADAMS[J]. Mechanical Management and Development, 2013, 0(4): 131-132 |
| |
| Authors: | YANG Gao-hong |
| |
| Affiliation: | YANG Gao-hong (Shanxi Institute of Mechanical and Electrical Engineering, Changzhi 046011, China) |
| |
| Abstract: | Firstly, the Pro/E model into a gear drive to ADAMS, then in ADAMS model applied to power, load and restraint, and in the mutual meshing gear is applied between the contact pair （Contact）, and complete the virtual prototype model. Finally, the virtual prototype model simulation analysis, thus proving the correctness of the virtual prototype model. |
| |
| Keywords: | gear transmission virtual prototype simulation |
| 本文献已被 维普 等数据库收录！ |
|
