Examination of the Transferability of Technological key Features of Paperboard Deep Drawing Towards the Application in Fast‐Running Packaging Machines

The deep‐drawing process of paperboard has experienced essential improvement in the recent past; however, the technological advancements have not been transferred to packaging machines yet. Two of the most important issues with regard to the reliable production of high quality 3D shapes are the use of elevated moisture and defined blank holder force profiles. This paper examines a roll preparation method for applying additional water to the paperboard and analyses a spring‐loaded blank holder solution with regard to its achieved accuracy and reliability of the force characteristics. A two‐sided roll application of water on the paperboard using a sponge rubber cover on one of the rolls produces a water intake of up to 12%. The effect of moisture applied by roll preparation is higher compared to conditioning under controlled climate conditions, and the preparation time is reduced to a few seconds. The spring‐loaded blank holder introduced in the paper completely works in position control and avoids the switch over to force control as well as the problem of small position steps, which were necessary during force control. A harmonic oscillation of the blank holder while the material is drawn out of it could not be observed up to an output of 150 cycles per minute. An application of a roll‐based moisturization unit and a spring‐loaded blank holder force in modern packaging machines appears feasible and favourable according to the results of this paper and maintains the capabilities of this 3D forming technology to a large part. Copyright © 2016 John Wiley & Sons, Ltd.