Microstructure-composition relationships and Ms temperatures in Fe-Cr-Mn-N alloys

Microstructure-composition relationships and M_s temperatures have been determined in high purity nitrided Fe-Cr-Mn alloys, as part of a program to develop improved corrosion-abrasion resistant steels with unstable austenitic microstructures. Compositions in the range 8 to 12 pct Cr, 0 to 10 pct Mn, and 0 to 0.6 pct N were investigated by a resistivity technique to determine M_s temperatures and by X-ray diffraction and metallography to determine constitution. Hardness measurements were also made. At the low alloy end of the range, microstructures after annealing and air cooling are fully martensitic while at the high alloy end they are fully austenitic. At intermediate compositions, mixed martensite-austenite microstructures (with epsilon present as a minor phase in some cases) and unstable austenitic microstructures are obtained. The austenitic alloys contain a high density of stacking faults and the unstable austenitic alloys transform to martensite on deformation. At low N contents (up to at least 0.25 pct N) the M_s-composition relationship is linear and described by: M_s = 555 - 9(Cr - 8) - 40Mn - 450N 1] where M_s is in °C and Cr, Mn, and N are the weight percentages of these elements. At higher N contents, the M_s generally falls more rapidly with increasing nitrogen content. Nitrogen solubility at 1050 °C exceeds about 0.3 pct in all alloys and increases with increasing Cr and Mn content. In commercial purity steels, unstable austenitic microstructures are expected to be obtained in compositions around 10 to 14 pct Cr, 8 to 12 pct Mn, and 0.1 to 0.3 pct N when the total level of these elements is selected to ensure the M_s is below room temperature.