| 轴向移动量程序化计算及工艺参数对轴向移动量的影响 |
| |
| 引用本文： | 邢希东,束学道,胡正寰.轴向移动量程序化计算及工艺参数对轴向移动量的影响[J].重型机械,2003(6):45-47. |
| |
| 作者姓名： | 邢希东 束学道 胡正寰 |
| |
| 作者单位： | 1. 北京科技大学机械工程学院,北京,100083;山东理工大学机械工程学院,淄博,255091
2. 北京科技大学机械工程学院,北京,100083 |
| |
| 基金项目： | 国家自然科学青年基金资助项目(50205004) |
| |
| 摘 要： | 本文在综合楔横轧轧制过程不同阶段轴向移动量计算规律的基础上,开发并编制出轴向移动量计算机源程序,并用该程序定量地分析了断面收缩率、展宽角、成形角和轧件直径工艺参数对其轴向移动量的影响规律,为楔横轧多楔模具优化设计与仿真提供高效的计算手段和重要的理论依据。
|
| 关 键 词： | 楔横轧 多楔 轴向移动量 工艺参数 |
| 文章编号： | 1001-196X(2003)06-0045-03 |
| 修稿时间： | 2003年9月10日 |
The Progrom calculating of axial movement of rolled arts and the offect by proless porameters |
| |
| XING Xi-dong,SHU Xue-dao,HU Zheng - huan.The Progrom calculating of axial movement of rolled arts and the offect by proless porameters[J].Heavy Machinery,2003(6):45-47. |
| |
| Authors: | XING Xi-dong SHU Xue-dao HU Zheng - huan |
| |
| Abstract: | In this paper, based on synthesizing rules in axial movement of rolled part in different stages of cross wedge rolling, a source program to calculate axial movement of rolled parts has been developed. In the meantime, this program is applied in analyzing the impact of quantificationally different technical parameters on the axial movement of rolled parts in cross wedge rolling, in a condition of changing rough diameter, form-ing angle, spread angle and area reduction in turn, which provides a high effective calculating method and im-portant theoretical basis for optimizing design and simulation in multi - wedge mould in cross wedge rolling. |
| |
| Keywords: | cross wedge rolling multi - wedge axial movement of rolled part process parameter |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
