| Abstract: | A blend of bisphenol A polycarbonate (PC) and an acrylonitrile–styrene–acrylic elastomer (ASA) terpolymer with high surface gloss and excellent interfacial properties was developed for automobile applications. Because PC and the styrene‐co‐acrylonitrile (SAN) copolymer that formed the matrix in the PC/ASA blend were not miscible, two different types of compatibilizers were examined to improve the compatibility of the blend. A diblock copolymer composed of tetramethyl polycarbonate and poly(methyl methacrylate) (PMMA) was more effective than PMMA in increasing interfacial adhesion between PC and SAN. The surface gloss of the PC/ASA blend was always lower than that of the pure ASA included in the blend because of PC existing at the surface of the injection‐molding specimen. The PC/ASA blend with optimum surface gloss and enhanced interfacial adhesion was developed through the control of the molecular weight of PC and the compatibilizer. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 2097–2104, 2005 |
