| CBN含量对PCBN车刀切削性能影响的模拟与实验研究 |
| |
| 引用本文： | 邹娟,成照楠,邹芹,李艳国,王明智,齐效文. CBN含量对PCBN车刀切削性能影响的模拟与实验研究[J]. 矿冶工程, 2021, 41(3): 134-137. DOI: 10.3969/j.issn.0253-6099.2021.03.032 |
| |
| 作者姓名： | 邹娟 成照楠 邹芹 李艳国 王明智 齐效文 |
| |
| 作者单位： | 燕山大学 机械工程学院,河北 秦皇岛066004;燕山大学 机械工程学院,河北 秦皇岛066004;亚稳材料制备技术与科学国家重点实验室,河北 秦皇岛066004;亚稳材料制备技术与科学国家重点实验室,河北 秦皇岛066004 |
| |
| 基金项目： | 丹凤朝阳人才支持计划(丹人才办[2019]3号);国家自然科学基金(51102205) |
| |
| 摘 要： | 采用CBN含量(体积分数)50％和80％的自制PCBN材料分别建立焊接式90°刀尖角外圆车刀模型,运用Deform软件以切削速度250 m/min、进给量0.1 mm/r、背吃刀量0.25 mm的切削用量模拟精车45#淬火钢外圆面,通过对比刀具的应力场和主切削力,发现CBN含量变化对主切削力无明显影响.使用自制及市售的...
|
| 关 键 词： | 立方氮化硼 车刀 切削 45#淬火钢 Deform软件 |
| 收稿时间： | 2020-12-01 |
Simulation and Experimental Study of the Influence of CBN Content on the Cutting Performances of PCBN Turning Tool |
| |
| ZOU Juan,CHENG Zhao-nan,ZOU Qin,LI Yan-guo,WANG Ming-zhi,QI Xiao-wen. Simulation and Experimental Study of the Influence of CBN Content on the Cutting Performances of PCBN Turning Tool[J]. Mining and Metallurgical Engineering, 2021, 41(3): 134-137. DOI: 10.3969/j.issn.0253-6099.2021.03.032 |
| |
| Authors: | ZOU Juan CHENG Zhao-nan ZOU Qin LI Yan-guo WANG Ming-zhi QI Xiao-wen |
| |
| Affiliation: | 1.School of Mechanical Engineering, Yanshan University, Qinhuangdao 066004, Hebei, China; 2.State Key Laboratory of Metastable Materials Science & Technology, Yanshan University, Qinhuangdao 066004, Hebei, China |
| |
| Abstract: | A model was established for a 90° external turning tool by using self-made high entropy compound binder PCBN respectively with 50% and 80% CBN content (volume fraction). The finish turning of 45# quenched steel with 90° turning tool was simulated by using Deform software with cutting speed of 250 m/min, feed rate of 0.1 mm/r and back engagement of cutting edge of 0.25 mm. Based on the comparison of stress field and main cutting force, it is found that the CBN content hasn't brought significant effect to the main cutting force. The 90° weld turning tools, which were respectively made of self-made and commercial PCBN materials with different compositions, were taken in the experiments to finish turning the 45# quenched steel with outer circular surface. The results show that the self-made PCBN material with 80% CBN content has the better wear resistance, but poor toughness, while the turning tool made of self-made PCBN with 50% CBN content show a better comprehensive performance. |
| |
| Keywords: | cubic boron nitride turning tool cutting 45# quenched steel Deform software |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《矿冶工程》浏览原始摘要信息 |
|
点击此处可从《矿冶工程》下载全文 |
|
