| 508周轧厂不定径钢管输送工艺与优化 |
| |
| 引用本文： | 敖勇,罗喜泽. 508周轧厂不定径钢管输送工艺与优化[J]. 四川冶金, 2009, 31(3): 43-45,18 |
| |
| 作者姓名： | 敖勇 罗喜泽 |
| |
| 作者单位： | 攀钢集团成都钢铁有限责任公司,成都,610303;攀钢集团成都钢铁有限责任公司,成都,610303 |
| |
| 摘 要： | 结合508周轧厂品种规格更换频繁的生产特点，详述设备改造的必要性。针对周轧机现有的生产工艺提出优化方案，同时能满足生产定径、不定径钢管的要求。根据工艺的要求，对原设备进行改造设计。对相关设备提出详细设计方案。经过多方论证改造行之有效，能提高生产效率。
|
| 关 键 词： | 周期轧管机 生产工艺 优化 定径管 不定径管 |
DESIGN AND OPTIMIZATION OF NON-SIZING TUBES TRANSFER PROCESS OF Φ508 mm PILGER-ROLLING MILL |
| |
| Ao Yong,Luo Xize. DESIGN AND OPTIMIZATION OF NON-SIZING TUBES TRANSFER PROCESS OF Φ508 mm PILGER-ROLLING MILL[J]. Sichuan Metallurgy, 2009, 31(3): 43-45,18 |
| |
| Authors: | Ao Yong Luo Xize |
| |
| Affiliation: | Pangang Group Chengdu Iron &Steel Co.;Ltd;Chengdu 610303;China |
| |
| Abstract: | Based on the characteristics of quick frequent size Changing in Φ508mm Pilger-rolling Mill, the necessity of equipment modification is described in detail. An optimizing solution for the existing process was put forward, which can meet the production requirements of beth sizing and non-sizing tubes. The existing equipments were redesigned and modified according to technology requirements. Detailed plans are made for related equipments. Through extensive argumentation, the modification is proved to be practical and capable of increasing production efficiency. |
| |
| Keywords: | Pilger-rolling mill process optimization sizing tube non-sizing tube |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
