Modeling the impact of capillary pressure and air entrapment on fiber tow saturation during resin infusion in LCM |
| |
Authors: | Jeffrey M. Lawrence Valentin Neacsu Suresh G. Advani |
| |
Affiliation: | 1. Notre Dame University-Louaize, P.O. Box: 72, Zouk Mikael, Zouk Mosbeh, Lebanon;2. Ecole Centrale Nantes & ESI GROUP Chair, 1 rue de la Noe, Nantes F-44300, France;3. University of Delaware, Newark, DE 19716-3119, United States |
| |
Abstract: | Traditionally, capillary effects have been neglected when modeling the filling stage of Liquid Composite Molding processes. This simplification is justified because the inlet resin pressures are much higher than the capillary pressure. This simplification is also acceptable when impregnating fabrics in which their fiber tows saturate at the same rate as the bulk preform. However, this assumption is questionable for fabrics that exhibit dual scale in which the fiber tows saturate at a much slower rate than the bulk preform. In such cases, the capillary pressure can influence the time to saturate a fiber tow significantly and impact the overall impregnation dynamics. Since the flow front velocity inside the fiber tows is significantly smaller than the flow around them, it is important to include the capillary pressure that may aid the saturation of the tow. In this paper, we modify our existing simulation that can predict the filling of the bulk preform and the saturation of the fiber tows to include the capillary forces at the fiber tow level. Important parameters are identified and grouped in non-dimensional form. A parametric study is conducted to examine the role of these dimensionless parameters on the overall tow saturation levels. The modeling is extended to include the effect of entrapped air inside the tows on the overall saturation of the preform. An experimental technique using the optical properties of vinyl ester and glass fiber was used to qualitatively validate the proposed model. |
| |
Keywords: | |
本文献已被 ScienceDirect 等数据库收录! |
|