首页 | 本学科首页   官方微博 | 高级检索  
     

基于板上封装技术的大功率LED热分析
引用本文:姜斌,宋国华,缪建文,袁莉,纪宪明. 基于板上封装技术的大功率LED热分析[J]. 电子元件与材料, 2011, 30(6): 48-52
作者姓名:姜斌  宋国华  缪建文  袁莉  纪宪明
作者单位:南通大学电子信息学院;南通大学理学院;南通大学化学化工学院;
基金项目:江苏省自然科学基金资助项目(No.BK2008183); 南通市应用研究资助项目(No.K2010058); 南通市公共技术服务平台资助项目(No.DE2010005); 南通大学自然科学研究资助项目(No.09Z005)
摘    要:根据大功率LED板上封装(COB)技术的结构特点,提出三种COB方法.第一种方法是把芯片直接键合在铝制散热器k(COB-III型),另外两种方法是分别把芯片键合在铝基板上和铝基板的印刷线路板上(COB-II和COB-I型),并对三种COB的热特性进行有限元模拟、实验测量和对照分析.结果表明:在环境温度为30℃时,采用第...

关 键 词:大功率LED  板上封装  热阻  有限元热分析

Thermal analysis of high-power LED based on COB packaging technology
JIANG Bin,SONG Guohua,MIAO Jianwen,YUAN Li,JI Xianming. Thermal analysis of high-power LED based on COB packaging technology[J]. Electronic Components & Materials, 2011, 30(6): 48-52
Authors:JIANG Bin  SONG Guohua  MIAO Jianwen  YUAN Li  JI Xianming
Affiliation:JIANG Bin1,SONG Guohua2,MIAO Jianwen3,YUAN Li2,JI Xianming2(1.School of Electronics and Information,Nantong University,Nantong 226019,Jiangsu Province,China,2.School of Science,Nantong 226007,3.School of Chemistry and Chemical Engineering,China)
Abstract:Three kinds of high-power LED packing methods based on the structure and the character of COB were presented,the first method was that the LED chip was directly boned to the aluminum radiators(COB—III),the 2nd and 3rd methods were that LED chips were bonded on aluminum pad and PCB board(COB—II,COB—I),respectively.The thermal characteristics of the three COB structures were simulated by FEM analysis and tested.The results show that when the ambient temperature is 30 ℃,the LED junction temperatures of COB—II and COB—I structures are 21.5 ℃ and 42.7 ℃ respectively higher than that of COB—III structure,and heat resistances of COB—II and COB—I structures are 25.7,58.8 K/W respectively higher than that of COB—III,and COB—III structure have lower optical decline.
Keywords:high-power LED  chip on board  heat resistance  finite element thermal analysis  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号