| 带纵向槽筒形件拉深方法的研究 |
| |
| 引用本文： | 杨华林.带纵向槽筒形件拉深方法的研究[J].现代机械,2007(2):66-67,70. |
| |
| 作者姓名： | 杨华林 |
| |
| 作者单位： | 贵州电子信息职业技术学院,贵州,凯里,556000 |
| |
| 摘 要： | 针对传境拉深带纵向槽筒形件的方法的缺点,采用一次拉深成形的方法,并通过试验和计算获得毛坯的形状和尺寸。
|
| 关 键 词： | 拉深 纵向槽 毛坯 系数 |
| 文章编号： | 1002-6886（2007）02-0066-03 |
| 修稿时间： | 2006-10-17 |
To Study Drawing Forming Method of the Cylinder Possessed Vertical Slot |
| |
| YANG Hua-lin.To Study Drawing Forming Method of the Cylinder Possessed Vertical Slot[J].Modern Machinery,2007(2):66-67,70. |
| |
| Authors: | YANG Hua-lin |
| |
| Affiliation: | YANG Hua-lin |
| |
| Abstract: | The traditional method of drawing forming the cylinder possessed vertical slot was defective. Once drawing forming was adopted. The shape and dimension of blank were got by means of tests as well as calculations. |
| |
| Keywords: | drawing vertical slot blank coefficient |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
