| 汽车覆盖件翻边整形模结构设计规范 |
| |
| 引用本文： | 胡芳鸽.汽车覆盖件翻边整形模结构设计规范[J].模具工业,2005(9):28-30. |
| |
| 作者姓名： | 胡芳鸽 |
| |
| 作者单位： | 广州本田汽车有限公司,广州,510700 |
| |
| 摘 要： | 根据实际生产经验和模具设计技术,介绍了不同结构汽车覆盖件翻边整形模设计的基本规范以及凸、凹模结构和压料装置在设计中应满足的技术要求,使此类模具结构的设计规范化,提高了设计效率。
|
| 关 键 词： | 汽车覆盖件 翻边整形 模具 规范 |
| 文章编号： | 1001-2168(2005)09-0028-03 |
| 收稿时间： | 12 1 2004 12:00AM |
| 修稿时间： | 2004年12月1日 |
Design Specification of the Mechanics of Flanging and Restriking Die for Automobile Body Metal Sheets |
| |
| HU Fang-ge.Design Specification of the Mechanics of Flanging and Restriking Die for Automobile Body Metal Sheets[J].Die & Mould Industry,2005(9):28-30. |
| |
| Authors: | HU Fang-ge |
| |
| Abstract: | Fundamental specification of the design of different mechanics of flaging and restriking die for automobile body metal sheets was introduced based on practical experience and die design technology.Discussion was also on the structure of cavity die and punch and technical requirements that should be met in the design.Design of this group of die structure was made normalized and efficiency was raised accordingly. |
| |
| Keywords: | automobile body metal sheets flanging and restriking die specification |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
