首页 | 本学科首页   官方微博 | 高级检索  
     

一种考虑接地极选址及受端电网结构的偏磁电流减小方法
引用本文:刘连光,马成廉. 一种考虑接地极选址及受端电网结构的偏磁电流减小方法[J]. 中国电力, 2021, 54(7): 100-108. DOI: 10.11930/j.issn.1004-9649.201904098
作者姓名:刘连光  马成廉
作者单位:1. 新能源电力系统国家重点实验室(华北电力大学),北京 102206;2. 东北电力大学 输变电技术学院,吉林 吉林 132012
基金项目:国家重点研发计划资助项目(2016YFC0800100);国家自然科学基金资助项目(51577060, 51677068)
摘    要:基于受端电网的结构和接地极的位置对直流偏磁电流的影响,分别分析了交流电网各变电站不同联结方式下,换流站和相邻交流变电站在典型连接结构下的直流偏磁电流(DCBC)水平.分析了影响换流变压器和交流变压器DCBC值的因素,阐述了接地极选址及受端电网结构对变压器DCBC值的影响机理.考虑到受端电网结构和接地极的位置选择,提出了...

关 键 词:UHVDC  直流接地极  直流偏磁电流(DCBC)  受端电网  电网结构  接地极选址
收稿时间:2019-04-19
修稿时间:2020-01-15

A DC Bias Current Reducing Method Considering Grounding Electrode Location and Receiving-end Grid Structure
LIU Lianguang,MA Chenglian. A DC Bias Current Reducing Method Considering Grounding Electrode Location and Receiving-end Grid Structure[J]. Electric Power, 2021, 54(7): 100-108. DOI: 10.11930/j.issn.1004-9649.201904098
Authors:LIU Lianguang  MA Chenglian
Affiliation:1. State Key Laboratory of Alternate Electrical Power System with Renewable Energy Sources (North China Electric Power University), Beijing 102206, China;2. School of Power Transmission and Distribution Technology, Northeast Electric Power University, Jilin 132012, China
Abstract:Based on the influence of the receiving-end grid structure and the grounding electrode location on DC bias current, this paper analyzes the DC bias current (DCBC) level of the converter station and the adjacent AC substation in the typical connection structure under different connection modes of the AC substations. The factors affecting the DCBC value of converter and AC transformers are analyzed, and the influence mechanism of the grounding electrode location and the receiving-end grid structure on the transformer DCBC value is expounded. Considering the structure of receiving-end grid and the location selection of grounding electrode, a DCBC value reduction method for converter and AC transformers is proposed. The measures to suppress the DC bias current can be analyzed from the aspects of system operation mode selection, grounding electrode location selection, power grid structure planning and designing, etc. This paper proposes to prevent the bias current of the converter and AC transformer during the planning and designing stage.
Keywords:UHVDC  DC grounding electrode  DC bias current (DCBC)  receiving-end grid  grid structure  grounding electrode location  
点击此处可从《中国电力》浏览原始摘要信息
点击此处可从《中国电力》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号