| ZrN／TiN复合涂层刀具的制备及切削性能 |
| |
| 引用本文： | 刘建华,张卧波,邓建新,赵金龙,李友生.ZrN／TiN复合涂层刀具的制备及切削性能[J].山东工业大学学报,2006,36(6):14-18. |
| |
| 作者姓名： | 刘建华 张卧波 邓建新 赵金龙 李友生 |
| |
| 作者单位： | [1]山东大学机械工程学院,山东济南250061 [2]济南职业学院机械工程系,山东济南250014 |
| |
| 基金项目： | 国家自然科学基金（50475133）和教育部新世纪优秀人才支持计划（NCET-04-0622）资助课题 |
| |
| 摘 要： | 采用中频磁控溅射和电弧离子镀2种方法组合，在YG6硬质合金基体上沉积ZrN／TiN复合涂层．研究了复合涂层刀具的制备工艺，并对复合涂层刀具的性能参数进行了测试．通过切削试验研究了ZrN／TiN涂层对硬质舍金刀具切削性能的影响，并与未涂层刀具的切削效果做了对比．结果表明：ZrN／TiN涂层提高了硬质合金刀具的硬度，降低了涂层刀具的切削力，提高了涂层刀具的耐磨损能力．
|
| 关 键 词： | ZrN／TiN 磁控溅射 涂层 切削性能 |
| 文章编号： | 1672-3961（2006）06-0014-05 |
| 收稿时间： | 2006-05-29 |
Preparation and cutting performanle of ZrN/TiN coated tool |
| |
| LIU Jian-hua ZHANG Wo-bo, DENG Jian-xin ZHAO Jm-long , LI You-sheng.Preparation and cutting performanle of ZrN/TiN coated tool[J].Journal of Shandong University of Technology,2006,36(6):14-18. |
| |
| Authors: | LIU Jian-hua ZHANG Wo-bo DENG Jian-xin ZHAO Jm-long LI You-sheng |
| |
| Affiliation: | 1. School of Mechanical Engineering, Shandong University, Jinan 250061, China; 2. Mechanical Department, Jinan Vocational College, Jinan 250014, China |
| |
| Abstract: | ZrN/TiN coatings on YG6 cemented carbide were prepared by medium frequency magnetron sputtering and arc ion plating technique deposition in argon/nitrogen plasma. Values for hardness and bonding strength to the substrate are obtained. And their effectiveness in improving the cutting performance in machining was examined through cutting tests. The results reveal that high hardness and good bonding strength of ZrN/TiN coatings have reduced cutting force and improved wear-resistance of cutting tools in machining. |
| |
| Keywords: | ZrN/TiN magnetron sputtering coating cutting performance |
| 本文献已被 维普 等数据库收录！ |
