| 基于UG和MoldFlow的卷发机外壳注塑模设计与数控加工 |
| |
| 引用本文： | 杨勇强,李小莹. 基于UG和MoldFlow的卷发机外壳注塑模设计与数控加工[J]. 机床与液压, 2011, 39(22). DOI: 10.3969/j.issn.1001-3881.2011.22.008 |
| |
| 作者姓名： | 杨勇强 李小莹 |
| |
| 作者单位： | 1. 陕西科技大学机电工程学院,陕西西安,710021
2. 陕西省核工业电子技工学校,陕西西安,710024 |
| |
| 基金项目： | 陕西科技大学自然科学基金资助项目(ZX10-26) |
| |
| 摘 要： | 采用MoldFlow软件对卷发机外壳注塑模进行工艺分析,得到最佳浇口位置及最佳工艺参数,并运用UG Mold-Wizard模块设计其注塑模。利用UG/CAM模块分析该模具型腔的数控加工工艺,生成刀具加工轨迹并进行加工过程仿真,生成数控程序,从而实现了模具设计与制造的一体化。
|
| 关 键 词： | 注射模 UG软件 MoldFlow软件 数控加工 |
Design and NC Machining of Injection Mold for Curling Machine Shell Based on UG and MoldFlow |
| |
| YANG Yongqiang,LI Xiaoying. Design and NC Machining of Injection Mold for Curling Machine Shell Based on UG and MoldFlow[J]. Machine Tool & Hydraulics, 2011, 39(22). DOI: 10.3969/j.issn.1001-3881.2011.22.008 |
| |
| Authors: | YANG Yongqiang LI Xiaoying |
| |
| Affiliation: | YANG Yongqiang1,LI Xiaoying2(1.College of Mechanical & Electronic Engineering,Shaanxi University of Science & Technology,Xi'an Shaanxi 710021,China,2.Shaanxi School of Nuclear Industry Electronic Technical,Xi'an Shaanxi 710024,China) |
| |
| Abstract: | Injection molding process analysis of curling machine shell was done by using MoldFlow software.Best gate location and best process parameters were obtained.Its injection mold was designed by UG MoldWizard.By using UG/CAM,mold cavity NC machining process was analyzed,machining tool path was generated,and machining simulation was done and NC program was gotten.Integration of mold design and manufacturing is achieved. |
| |
| Keywords: | Injection mold UG software MoldFlow software NC machining |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
