| 磁流变调速风扇离合器的特性分析 |
| |
| 引用本文： | 单慧勇,杨延荣,卫勇,郭俊旺,张志勇. 磁流变调速风扇离合器的特性分析[J]. 机床与液压, 2011, 0(17) |
| |
| 作者姓名： | 单慧勇 杨延荣 卫勇 郭俊旺 张志勇 |
| |
| 作者单位： | 天津农学院机电工程系; |
| |
| 基金项目： | 天津市教委科技发展基金资助项目(20070913) |
| |
| 摘 要： | 应用Bingham模型建立磁流变离合器传递转矩与输出转速的计算模型,分析离合器的负载特性,结果表明:一定范围内可通过减小离合器输出转速增大输出转矩,减小工作间隙和增大传动圆盘内径都可增加离合器开环传动系统刚度。离合器所需控制比与最大调速比为平方关系,减小离合器传动圆盘内径及增大传动间隙、选择多间隙结构可提高离合器的控制比,增大调速范围。功率损失分析表明,拖动风扇调速时的滑差功率损失在传动比为3∶2时出现极值,因此实践中可通过控制传动比来控制滑差功率损失从而控制离合器的温升。
|
| 关 键 词： | 磁流变液 风扇离合器 调速特性 |
Theoretical Analysis of Magnetorheological Fan Clutch |
| |
| SHAN Huiyong,YANG Yanrong,WEI Yong,GUO Junwang,ZHANG Zhiyong. Theoretical Analysis of Magnetorheological Fan Clutch[J]. Machine Tool & Hydraulics, 2011, 0(17) |
| |
| Authors: | SHAN Huiyong YANG Yanrong WEI Yong GUO Junwang ZHANG Zhiyong |
| |
| Affiliation: | SHAN Huiyong,YANG Yanrong,WEI Yong,GUO Junwang,ZHANG Zhiyong(Mechanical & Electronic Engineering Department,Tianjin Agricultural College,Tianjin 300384,China) |
| |
| Abstract: | Based on Bingham model,the expressions of the torque and the output rotational speed within the magnetorheological fan clutch was derived.It is shown that the output torque increases as the output speed decreases,and the stiffness of open-loop clutch drive system increases as the working gap decreases or the radius of drive plate increases.The torque control ratio of clutch has a square relation with the speed regulation ratio.The control ratio increases as the radius of drive plate decreases,the working ga... |
| |
| Keywords: | Magnetorheological fluid Fan clutch Speed regulation characteristic |
| 本文献已被 CNKI 等数据库收录！ |
|
