| 电火花线切割加工参数对加工速度和表面粗糙度影响的研究 |
| |
| 引用本文： | 杨蕾,蔡安江.电火花线切割加工参数对加工速度和表面粗糙度影响的研究[J].机床与液压,2011(15). |
| |
| 作者姓名： | 杨蕾 蔡安江 |
| |
| 作者单位： | 西安建筑科技大学机电工程学院; |
| |
| 摘 要： | 讨论了电火花线切割加工中影响加工速度和表面粗糙度的几个主要参数:脉冲宽度、峰值电流、脉冲间隔及工件厚度,并通过正交试验分析了加工参数对加工速度、表面粗糙度的影响关系,为科学、合理地设定电火花线切割加工参数提供了参考。
|
| 关 键 词： | 电火花线切割 加工参数 加工速度 表面粗糙度 正交试验 |
Research on Influence of Processing Parameters on Processing Speed and Surface Roughness in WEDM |
| |
| YANG Lei,CAI Anjiang.Research on Influence of Processing Parameters on Processing Speed and Surface Roughness in WEDM[J].Machine Tool & Hydraulics,2011(15). |
| |
| Authors: | YANG Lei CAI Anjiang |
| |
| Affiliation: | YANG Lei,CAI Anjiang(School of Mechanical and Electrical Engineering,Xi'an University of Architecture and Technology,Xi'an Shaanxi 710055,China) |
| |
| Abstract: | Several major parameters influencing the processing speed and the surface roughness of WEDM processing,such as pulse width,circuit peak,pulse gap and thickness of the workpiece were discussed.Through the orthogonal experiment,the influence of processing parameters on the processing speed and the surface roughness was analyzed.The experimental result provides the reference for setting scientific and reasonable WEDM machining parameters. |
| |
| Keywords: | WEDM Processing parameter Processing speed Surface roughness Orthogonal experiment |
| 本文献已被 CNKI 等数据库收录！ |
