| 高频焊接轻型H型钢自动化生产线的设计 |
| |
| 引用本文： | 李冬林,游颖,李欢.高频焊接轻型H型钢自动化生产线的设计[J].机床与液压,2011,39(20). |
| |
| 作者姓名： | 李冬林 游颖 李欢 |
| |
| 作者单位： | 湖北工业大学机械工程学院,湖北武汉,430068 |
| |
| 基金项目： | 武汉市重点科技攻关项目(200810321123) |
| |
| 摘 要： | 设计腹板高度不大于100 mm的高频焊接H型钢自动化生产线。制定了整个生产线的工艺流程,将生产线分为焊接前的准备、高频焊接、焊后的处理等过程;采用SolidWorks软件从零件的特征建模到机构的虚拟装配进行了虚拟样机设计,对机构和整条生产线进行了运动仿真;采用PLC控制器组成闭环控制系统,控制整条生产线的自动运行。
|
| 关 键 词： | 高频焊接 H型钢 虚拟样机 PLC控制系统 |
Design of Automatic Production Line for HF Welding Light Gauge H-beam |
| |
| LI Donglin,YOU Ying,LI Huan.Design of Automatic Production Line for HF Welding Light Gauge H-beam[J].Machine Tool & Hydraulics,2011,39(20). |
| |
| Authors: | LI Donglin YOU Ying LI Huan |
| |
| Affiliation: | LI Donglin,YOU Ying,LI Huan(School of Mechanical Engineering,Hubei University of Technology,Wuhan Hebei 430068,China) |
| |
| Abstract: | The automatic production line for high-frequency welding H-beam was designed,which was applied to produce the H-beam of the web plate with the height less than 100 mm.The technological process for the whole production line was framed,and the designs were conducted by dividing the production line into pre-welding processing,HF welding and post-welding processing.The software SolidWorks was applied to design the virtual prototype and to simulate the motion of mechanisms on production line.The closed-loop cont... |
| |
| Keywords: | High-frequency(HF) welding H-beam Virtual prototype PLC control system |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
