| 离合器弹簧用钢65Si2CrV的连续冷却转变曲线 |
| |
| 引用本文： | 徐志东,任安超,曾彤,夏念平,肖 斌,杨志婷. 离合器弹簧用钢65Si2CrV的连续冷却转变曲线[J]. 特殊钢, 2016, 37(4): 55-57 |
| |
| 作者姓名： | 徐志东 任安超 曾彤 夏念平 肖 斌 杨志婷 |
| |
| 作者单位： | 武汉钢铁(集团)研究院，武汉430080 |
| |
| 摘 要： | 实验用弹簧钢65Si2CrV（/%:0.66C,1.43Si,0.74Mn,0.007P,0.008S,0.68Cr,0.11V）由25 kg真空感应炉冶炼,并轧成16 mm×300 mm扁坯。通过Gleeble-2000热模拟试验机,利用膨胀法结合金相分析以及显微硬度,获得弹簧钢65Si2CrV的静态连续冷却转变曲线（CCT曲线）,并得出0.210℃/s冷却速度时的相变温度;当冷却速度由1℃/s增至5℃/s时HV10硬度值急剧增加,由380增加至800。
|
| 关 键 词： | 弹簧钢65Si2CrV 连续冷却转变曲线 组织 显微硬度 |
| 收稿时间： | 2016-03-07 |
Continuous Cooling Transformation Curves of Spring Steel 65Si2CrV for Clutch |
| |
| Xu Zhidong,Ren Anchao,Zeng Tong,Xia Nianping,Xiao Bin,Yang Zhiting. Continuous Cooling Transformation Curves of Spring Steel 65Si2CrV for Clutch[J]. Special Steel, 2016, 37(4): 55-57 |
| |
| Authors: | Xu Zhidong Ren Anchao Zeng Tong Xia Nianping Xiao Bin Yang Zhiting |
| |
| Affiliation: | Research and Development center, Wuhan Iron and Steel Group, Wuhan 430080 |
| |
| Abstract: | The tested spring steel 65Si2CrV (/% : 0. 66C, 1. 43Si, 0. 74Mn, 0. 007P, 0. 008S, 0. 68Cr, 0. 11V) is melted by 25 kg vacuum induction fumace and rolled to 16 mm x300 mm slab. The static continuous cooling transformation (CCT) curves of spring steel 65Si2CrV is obtained by Gleeble-2000 thermal simulation testing machine using dilatometry combined with metallographic analysis and microhardness test, and the phase temperature of steel cooled with 0. 2 ~ 10 °C/ s is gotten, as cooling rate increases from 1°C/s to 5 °C/s the HV10 microhardness value of steel dramatically increases from 380 to 800. |
| |
| Keywords: | |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《特殊钢》浏览原始摘要信息 |
|
点击此处可从《特殊钢》下载全文 |
|
