| 薄壁铸铝合金高速铣削加工试验研究 |
| |
| 引用本文： | 黄晓峰,杨敏. 薄壁铸铝合金高速铣削加工试验研究[J]. 机械工程师, 2010, 0(1): 112-113 |
| |
| 作者姓名： | 黄晓峰 杨敏 |
| |
| 作者单位： | 1. 盐城工学院,机械工程学院,江苏,盐城,224053
2. 盐城市产品质量监督检验所,江苏,盐城,224003 |
| |
| 摘 要： | 以铸铝合金薄壁件为加工对象,分别研究不同的切削速度、每齿进给量、径向切深对表面质量和切削力的影响规律,并优化切削参数的选择,力求为合理选择高速切削加工参数提供可靠依据。
|
| 关 键 词： | 高速铣削 薄壁铸铝合金 铣削参数 |
Experimental Investigation on Effect of High Speed Milling on Cast Aluminum Alloy Workpiece |
| |
| HUANG Xiao-feng,YANG Min. Experimental Investigation on Effect of High Speed Milling on Cast Aluminum Alloy Workpiece[J]. Mechanical Engineer, 2010, 0(1): 112-113 |
| |
| Authors: | HUANG Xiao-feng YANG Min |
| |
| Affiliation: | 1.Department of Mechanical Engineering/a>;Yancheng Institute of Technology/a>;Yancheng 224053/a>;China/a>;2.Yancheng Institute of Supervision &Inspection on Product Quality/a>;Yancheng 224003/a>;China |
| |
| Abstract: | To improve the surface quality of high speed milling Aluminum alloy workpiece,the thin-walled cast Aluminum alloy workpiece is investigated in this paper. The influences of cutting parameters on surface quality and cutting force under high speed milling are researched by single factor experiments. The effect rules of parts surface with cutting speed,feed per tooth and the radial depth of cut are obtained by experiments. And the optimization of cutting parameters are also obtained. The results provide credib... |
| |
| Keywords: | high speed milling thin-walled cast Aluminum alloy milling parameter |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
