东湾选矿厂改扩建初步设计方案研究 |
| |
引用本文: | 刘亚博.东湾选矿厂改扩建初步设计方案研究[J].有色金属(选矿部分),2011(6):43-45. |
| |
作者姓名: | 刘亚博 |
| |
作者单位: | 嵩县金牛有限责任公司,河南洛阳,471435 |
| |
摘 要: | 流程考察和工艺试验研究结果表明,在-74μm含量75%的较粗磨矿细度下提高处理能力,适当的浸出时间,可以达到最佳的浸出效果,同时可获得较好的浮选指标,从而提高金的回收率。改造完成后的选矿厂处理能力由原来的400t/d提高到500 t/d,选矿回收率由原来的81.06%提高到85.80%,吨矿综合成本下降了22.05元,创造了较好的经济效益。
|
关 键 词: | 磨矿细度 处理能力 回收率 经济效益 |
Study on Preliminary Design of Reconstruction and Expansion of Dongwan Dressing Plant |
| |
Authors: | LIU Yabo |
| |
Affiliation: | LIU Yabo(Songxian Jinniu Co.,Ltd.,Luoyang Henan 471435,China) |
| |
Abstract: | Flowsheet investigation and process test show that under the relatively coarse grinding fineness with-74 μm occupying 75% and with the leaching time modified accordingly,the optimal leaching result and better flotation indexes can be obtained.After reconstruction,the processing capacity is increased from 400 t/d to 500 t/d,the recovery rate is improved from 81.06% to 85.80% and the overall cost per ton is lowered by 22.05 yuan RMB.Good economic benefits are achieved. |
| |
Keywords: | grinding fineness processing capacity recovery economic benefits |
本文献已被 CNKI 维普 万方数据 等数据库收录! |
|