| CAE技术在盘体铸造工艺优化过程中的应用 |
| |
| 引用本文： | 汪火良,丁恒敏,罗文,王永振,武智猛.CAE技术在盘体铸造工艺优化过程中的应用[J].大型铸锻件,2010(1):1-3,17. |
| |
| 作者姓名： | 汪火良 丁恒敏 罗文 王永振 武智猛 |
| |
| 作者单位： | 昆明理工大学,云南,650093 |
| |
| 摘 要： | 以某厂的盘体铸件为研究对象,利用仿真软件ProCAST对其充型过程和凝固过程进行数值模拟,并预测缩孔和缩松的存在情况。根据数值模拟的结果对盘体铸件工艺方案进行相应的改进,显著降低了缩孔和缩松缺陷,并提高了产品质量。
|
| 关 键 词： | 盘体 缩孔缩松 数值模拟 ProCAST |
Application of CAE Technology in Disk Body Casting Process Optimization |
| |
| Wang Huoliang,Ding Hengmin,Luo Wen,Wang Yongzhen,Wu Zhimeng.Application of CAE Technology in Disk Body Casting Process Optimization[J].Heavy Casting and Forging,2010(1):1-3,17. |
| |
| Authors: | Wang Huoliang Ding Hengmin Luo Wen Wang Yongzhen Wu Zhimeng |
| |
| Affiliation: | Wang Huoliang, Ding Hengmin, Luo Wen, Wang Yongzhen, Wu Zhimeng |
| |
| Abstract: | The disk body casting produced by a certain factory has been investigated as an object of study.ProCAST was introduced to simulate the filling and solidification process of the disk body casting,and then the shrinkage cavity and shrinkage porosity defects were forecasted.On the basis of the simulation,the casting technology was improved.The defects such as shrinkage cavity and shrinkage porosity in the casting were reduced obviously and the quality of the product was improved. |
| |
| Keywords: | disk body shrinkage porosity numerical stimulation ProCAST |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
