首页 | 本学科首页   官方微博 | 高级检索  
     

CuO-水纳米流体多孔球层池沸腾传热特性
引用本文:祝啸,陈威,李林星.CuO-水纳米流体多孔球层池沸腾传热特性[J].化工进展,2016,35(8):2381-2386.
作者姓名:祝啸  陈威  李林星
作者单位:上海海事大学商船学院, 上海 201306
基金项目:国家自然科学基金(51276107)、交通部应用基础项目(2013319810150)及上海市教委创新科研课题(14ZZ142)。
摘    要:对CuO-水纳米流体在6mm多孔球层内进行池沸腾实验研究。实验使用了40nm的CuO纳米颗粒,加以不同浓度的十二烷基苯磺酸钠(SDBS)作为表面活性剂,配成多种不同配比关系的纳米流体。实验结果表明,当表面活性剂浓度与纳米颗粒浓度在0.01%~0.03%(质量分数,下同)之间变化时,两者浓度相近的纳米流体稳定性较好,沸腾传热效果高。其中表面活性剂浓度略高于CuO浓度时,传热效果较好,在SDBS浓度为0.03%、CuO浓度为0.02%时达到最大,为41670W/(m2·K);而纳米颗粒浓度增大时,根据其对纳米流体的稳定性和沉降效应的影响,在不同程度上可增强或削弱沸腾传热。同时对纳米流体的池沸腾进行可视化研究,利用气泡脱离特性对实验结果作了诠释。所得结果可为纳米流体在多孔球层的池沸腾传热特性研究提供有益的研究数据。

关 键 词:纳米流体  表面活性剂  池沸腾  多孔介质  传热  
收稿时间:2015-12-31

An experimental investigation on heat transfer performance of CuO-H2O nanofluid pool boiling with porous bead-packed structures
ZHU Xiao,CHEN Wei,LI Linxing.An experimental investigation on heat transfer performance of CuO-H2O nanofluid pool boiling with porous bead-packed structures[J].Chemical Industry and Engineering Progress,2016,35(8):2381-2386.
Authors:ZHU Xiao  CHEN Wei  LI Linxing
Affiliation:School of Merchant Marine, Shanghai Maritime University, Shanghai 201306, China
Abstract:Heat transfer performance of nanofluids in nucleate pool boiling was experimentally investigated in 6 mm copper beads. The nanofluid was prepared by dispersing the 40nm CuO nanoparticles in the base fluid water by using sodium dodecyl benzene sulphate(SDBS) as the surfactants,and both the proportion of the mass fraction were different. Experimental results showed that the nanofluid is in stability and has a good heat transfer performance at the same concentration ranges from 0.01% to 0.03% of nanoparticles and surfactants. The nanofluid could transfer heat more effectively at the slightly higher concentration of surfactants. The best heat transfer coefficient from the range above was 41670 W/(m2·K),where the concentration of CuO and SDBS were 0.02% and 0.03%,respectively. The sedimentation occurred obviously at the larger proportion of nanoparticles,which could enhance or weaken the boiling heat transfer at the different grade. The visualization research of nanofluid pool boiling was also investigated. It could interpret experimental results by analyzing the detachment characteristics of boiling bubble. All these results in this paper can be supplied for the research of nanofluid pool boiling on porous bead-packed structures with useful experimental data.
Keywords:nanofluid  surfactants  pool boiling  porous media  heat transfer  
本文献已被 CNKI 等数据库收录!
点击此处可从《化工进展》浏览原始摘要信息
点击此处可从《化工进展》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号