| 防划伤高光ABS/PMMA合金的制备及其性能探讨 |
| |
| 引用本文： | 陈振嘉,吴水珠,赵建青,曾钫,彭忠泉.防划伤高光ABS/PMMA合金的制备及其性能探讨[J].塑料科技,2010,38(1). |
| |
| 作者姓名： | 陈振嘉 吴水珠 赵建青 曾钫 彭忠泉 |
| |
| 作者单位： | 1. 华南理式大学高分子材料科学与工程系,广东,广州,510640
2. 广州金发科技股份有限公司,广东,广州,5100520 |
| |
| 摘 要： | 以ABS为主要原料与PMMA共混来改善ABS的表面光泽度,添加无机填料TiO2和BaSO4来改善ABS/PMMA合金的表面硬度,探讨了PMMA和无机填料含量对ABS/PMMA合金力学性能、光学性能和硬度的影响。结果表明:合金的表面光泽度和硬度随着PMMA含量的增加而增大,但过多的PMMA会降低合金的冲击性能,当PMMA/ABS=30/70时,合金综合性能最佳;加入无机填料后,合金的表面硬度上升,表面光泽度、拉伸强度和冲击强度下降。
|
| 关 键 词： | 丙烯腈-丁二烯-苯乙烯共聚物 聚甲基丙烯酸甲酯 防划伤 表面光泽 |
Preparation and Properties of Scratch Resistance and High Surface Gloss ABS/PMMA Alloy |
| |
| Chen Zhenjia,Wu Shuizhu,Zhao Jianqing,Zeng Fang,Peng Zhongquan.Preparation and Properties of Scratch Resistance and High Surface Gloss ABS/PMMA Alloy[J].Plastics Science and Technology,2010,38(1). |
| |
| Authors: | Chen Zhenjia Wu Shuizhu Zhao Jianqing Zeng Fang Peng Zhongquan |
| |
| Abstract: | PMMA was employed to improve the surface gloss of ABS.The inorganic fillers(TiO2 and BaSO4) were added to improve the surface hardness of ABS/PMMA alloy.The effects of use amount of inorganic fillers and PMMA on mechanical property,optical property and hardness of the alloy were investigated.The results show that:the sufrace gloss and hardness of the alloy increase with the increase of PMMA content,but too much PMMA decreases the impact strength of the alloy,when PMMA/ABS=30/70,the general property of the a... |
| |
| Keywords: | ABS PMMA Scratch Resistance Surface gloss |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
