首页 | 本学科首页   官方微博 | 高级检索  
     


Selective and nonselective wet etching of Zn0.9Mg0.1O/ZnO
Authors:Jau-Jiun Chen  Soohwan Jang  F. Ren  Yuanjie Li  Hyun-Sik Kim  D. P. Norton  S. J. Pearton  A. Osinsky  S. N. G. Chu  J. F. Weaver
Affiliation:(1) Department of Chemical Engineering, University of Florida, 32611 Gainesville, FL;(2) Department of Materials Science and Engineering, University of Florida, USA;(3) SVT Associates, 55344 Eden Prairie, MN;(4) Multiplex, Inc., 07080 South Plainfield, NJ
Abstract:Wet etch rates at 25°C for Zn0.9Mg0.1O grown on sapphire substrates by pulsed laser deposition (PLD) were in the range 300–1100 nm · min−1 with HCl/H2O (5×10−3−2×10−2 M) and 120–300 nm · min−1 with H3PO4/H2O (5×10−3−2×10−2 M). Both of these dilute mixtures exhibited diffusion-limited etching, with thermal activation energies of 2–3 kCal · mol−1. By sharp contrast, the etch rates for ZnO also grown on sapphire by PLD were much slower in similar solutions, with rates of 1.2–50 nm · min−1 in HCl/H2O (0.01–1.2 M) and 12–54 nm · min−1 in H3PO4/H2O (0.02–0.15 M). The etching was reaction limited over the temperature range 25–75°C, with activation energies close to 6 kCal · mol−1. The resulting selectivity of Zn0.9Mg0.1O over ZnO can be a high as ∼400 with HCl and ∼30 with H3PO4.
Keywords:ZnO  etching  selectivity
本文献已被 SpringerLink 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号