Comparative study on dry etching of polycrystalline diamond thin films

The reactive ion etching (RIE) technique was used to etch polycrystalline diamond thin films. In this study we investigate the influence of process parameters (total pressure, rf power, gas composition) of standard capacitively coupled plasma RIE system on the etching rate of diamond films. The surface morphology of etched diamond films was characterized by Scanning Electron Microscopy and the chemical composition of the etched film part was investigated by Raman Spectroscopy.We found that the gas composition had a crucial effect on the diamond film morphology. The use of CF₄ gas resulted in flatter surfaces and lateral-like etching, while the use of pure O₂ gas resulted in needle-like structures. Addition of argon to the reactant precursors increased the ion bombardment, which in turn increased the formation of non-diamond phases. Next, increasing the rf power from 100 to 500 W increased the etching rate from 5.4 to 8.6 μm/h. In contrast to this observation, the rise of process pressure from 80 to 150 mTorr lowered the etching rate from 5.6 down to 3.6 μm/h.