| 基于ANSYS的断路器双金属耦合分析 |
| |
| 引用本文： | 王丽华,张永飞,郑树展. 基于ANSYS的断路器双金属耦合分析[J]. 低压电器, 2010, 0(11): 10-13 |
| |
| 作者姓名： | 王丽华 张永飞 郑树展 |
| |
| 作者单位： | 1. 天津职业大学,机电工程与自动化学院,天津,300410
2. 天津航空机电有限公司,天津,300308 |
| |
| 摘 要： | 利用ANSYS软件建立了断路器双金属有限元分析模型,运用直接耦合方法对双金属进行了三维热-电耦合分析和二维热-应力耦合分析。仿真得到的双金属温度分布云图和温度随时间变化的曲线与实测结果基本吻合;通过双金属的变形分布云图和应力分布云图得到了各节点位移的详细数据。
|
| 关 键 词： | 有限元分析 双金属 断路器 耦合分析 |
Coupled Analysis of Double-Metal on Circuit Breaker Based on ANSYS |
| |
| WANG Lihua,ZHANG Yongfei,ZHENG Shuzhan. Coupled Analysis of Double-Metal on Circuit Breaker Based on ANSYS[J]. Low Voltage Apparatus, 2010, 0(11): 10-13 |
| |
| Authors: | WANG Lihua ZHANG Yongfei ZHENG Shuzhan |
| |
| Affiliation: | WANG Lihua1,ZHANG Yongfei1,ZHENG Shuzhan2(1.School of Mechanical Engineering and Automation,Tianjin Vocational Institute,Tianjin 300410,China,2.Tianjin Aviation Electro Mechanical Co.,Ltd.,Tianjin 300308,China) |
| |
| Abstract: | Models of circuit breaker double-metal were built by ANSYS,then the 3D thermal-electric coupling and the 2D thermal-stress coupling analysis of double-metal were carried out by direct coupling method.The nephogram of temperature distribution of double-metal and the curve of temperature VS time were obtained by simulation.The results were basically identical with the actual measurements.With the nephogram of deformation and stress distribution,thus the particular data of nodal displacement were acquired. |
| |
| Keywords: | finite element analysis double-metal circuit breaker coupled analysis |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
